Guy Fawkes Pin
Jump to navigation
Jump to search
You can make a Guy Fawkes pin using thigns found at Noisebridge.
Materials[edit]
1) Club Mate bottle 2) Pin mbackings
Tools[edit]
1) Button maker 2) Heat Gun 3) Paper towel
Instructions[edit]
1) If the mate bottle is full, drink it. 2) Wet the paper towel and wrap it around the mate bottle 3) Slowly wave the heatgun around the edges of the label. The goal here is the melt the glue so the edges loosen. Take care doing this step and be patient. 4) Cut out the guy fawkes sigil. 5) Use the sigil in the pin tool