Refillable Parts Area

[2:36 AM]
lizzie: Matt and I were talking about having a special subset of
 the parts shelves be specific parts that we re-order when they're
 running low and can donate to when we use.

[2:39 AM]  
The parts section is great but it can be really annoying to design boards, 
since we don't have parts numbers for many parts, and the footprints are 
unpredictable.

[2:39 AM]  
Being able to reorder the entire special stock would be cool.

Please add to this list of electronics components and materials that we would like to see maintained at Noisebridge

	Qty	Part / material	Short description
1	250	Red LED	Red LED, 5mm, through-hole
2	250	Green LED	Green LED, 5mm, through-hole
3	250	Blue LED	Blue LED, 5mm, through-hole
4		Jumper wires	Pre-made jumper wires
5		Male headers	0.1" pitch male header pins
6		Female headers	0.1" pitch female header pins
7		Perf boards	Various sizes
8		potentiometers	with the same footprints; that can actually fit on a breadboard
9		switches	with predictable footprints
10		common caps
11		common resistors
12		common op-amps
13		74xx series logic	inverters, MUXes, etc
14		general purpose BJTs	in both P- and N-doped flavors
15		general purpose MOSFETS	in both P- and N-doped flavors
16		connectors, jacks, plugs, header pins, etc
17		1N400x series diodes
18		DC jacks	commonly called CCTV 2.1mm jacks
19		Step up and down converters	$1-$2 a piece on aliexpress
20		PCA9685	makes controlling LEDs and servos super easy
21		DHT11/22	great temperature and humidity sensor
22		DSB18B20	great simple temp sensor
23		3.5mm audio cable	connectors
24		OLED display	mini ones for arduino and pi
25		JST connectors
26
27
28
29
30