Grizzly G4015Z - Combo Lathe/Mill
| Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate | E |
| Guilds (Volunteer) | Maintainers | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | WGs | E |
| Fabrication | Sewing | 3D Printing | Print Shop | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter | V · T · E |
| Metal Shop | Lathe | Manual Mill | MaxNCMill | Grizzly G0463 | (Edit) |
File:Noisebridge Grizzly G4015Z.png
Product page: https://www.grizzly.com/products/Grizzly-19-3-16-Combo-Lathe-Mill/G4015Z
Handles soft metals OK.
- The lathe is most likely not aligned / leveled, so beware if you are doing precision work.
- The scales are indicated at 0.001" / 0.025mm. Obviously, one of the these is wrong. It's unfortunately the metric -- it should be 0.0254mm.
- The gearbox oil should be changed every 6 months. Last change: May 25 2024