Prusa i3 Mk2 Printer

From Noisebridge Wiki

Revision as of 04:55, 10 February 2026 by Maintenance script (talk | contribs) (Imported from Noisebridge wiki backup)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate

E

Guilds (Volunteer) | Maintainers | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | WGs

E

Fabrication | Sewing | 3D Printing | Print Shop | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter

V · T · E

3D Printing | Notes

V · T · E

PRUSA i3 MK2s PRINTER[edit]

File:Original prusai3mk2 0.png See: http://manual.prusa3d.com/c/English_manuals

Status: 5/22/19 (Colin Roberson)

Uploaded firmware for "titan aero" extruder
Bed leveling sucks at the moment

5/27/19 (Derek Redfern)

Shifted PINDA sensor slightly downwards and ran full XYZ calibration. Got most of the way through but it didn't seem to detect cal point #4 on the second round (smooshed the tip and PINDA sensor into the bed). Working from sections 6.3.5 and 6.3.10.2 in the manual.

Retrieved from "http://beyla.local/index.php?title=Prusa_i3_Mk2_Printer&oldid=4272"