Prusa i3 Mk2 Printer
Jump to navigation
Jump to search
| Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate | E |
| Guilds (Volunteer) | Maintainers | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | WGs | E |
| Fabrication | Sewing | 3D Printing | Print Shop | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter | V · T · E |
| 3D Printing | Notes | V · T · E |
PRUSA i3 MK2s PRINTER[edit]
File:Original prusai3mk2 0.png See: http://manual.prusa3d.com/c/English_manuals
Status: 5/22/19 (Colin Roberson)
- Uploaded firmware for "titan aero" extruder
- Bed leveling sucks at the moment
5/27/19 (Derek Redfern)
- Shifted PINDA sensor slightly downwards and ran full XYZ calibration. Got most of the way through but it didn't seem to detect cal point #4 on the second round (smooshed the tip and PINDA sensor into the bed). Working from sections 6.3.5 and 6.3.10.2 in the manual.