Connex 350

3D Printing | Notes

V · T · E

The Stratasys Connex Objet350 is our very big multifilament printer which is currently undergoing repairs. MAINTAINERS: User:Pyconaut User:Magnet DOCUMENTATION: Stratasys specs [Large Stratasys dump torrent (Contact Magnet)] STATUS: Not yet operational. Needs repaired temperature sensor. Connex 350/big Current Problems Cant maintain proper pressure (auto turnoff) -Vacuum broken (improbable) -Cracked Cable (likely) -Flooded Vaccum (cleaned out) Maggots in the lining One print head not receiving proper voltage -Broken head -Messed main board -Messed up wiring One head wont light up -Broken head -Not plugged in properly -Gunk in contacts Maybe temperature sensor broken (previous maintainers said so) -Unknown reason What is it The Objet Connex350™ features Objet’s pioneering multi-material 3D printing capability with an intermediate-size build tray of 350 x 350 x 200mm. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology. The Objet Connex 350 features: Multi-material models – eliminating the need to design, print and glue separate model elements together Different parts. Different materials. Same tray – saves time and serves multiple requirements simultaneously Outstanding 16-micron, high-resolution print layer accuracy 600 DPI X & Y resolution Thin walls down to 0.6mm (0.024″) High throughput – Up to 20mm per hour per strip Reliability and robustness – at least 72 hours of non-stop build capacity High speed – simultaneously print multiple items of different materials; models cure while printing; models can be handled immediately after print Easy-to-remove support material enabling complex geometries Office convenience– Quiet system, using fully-sealed REACH compliant cartridges that are easy to load and unload Most work done and organization done in Slack